Take a small hammer and lightly hit the center part of the connector this will break the seal then you can chuck the tube into the dumpster. Accidentally broken your TV.
Jul 27 2004 If you wish for some reason to defuse a picture tube simply snap off the nipple at the rear of the tube.
How to safely break a tv tube. Scoop up glass fragments and powder using stiff paper or cardboard. Use sticky tape such as duct tape to pick up. Dec 23 2016 Safely taking apart a 15 year old Trintron CRT TV and showing the best parts to take out of it.
Connect one alligator connector clip to a flat-head screwdriver and the other clip to another any screwdriver. When the nipple breaks the air rushes in and usually disturbs the coating on the inside of the front of the tube so if you want the coating to remain as far I am aware youre hooped. Oct 27 2011 Before you throw that old TV into the local dump you should be aware of how many toxic materials are in it especially old-style cathode ray tube CRT sets.
My suggestion would be to see if you can acquire a TV housing minus the internals and black out the inside then place a couple of sheets of safety glass inside the housing at the front and smash that. If you smash the tube the wrong way the glass implodes due to the vacuum and goes everywhere including people within about 6ft. After this is done you can safely use a hammer to break off the thin glass back of the tube.
Lynnm Jul 26 2004. Use pliers and squeeze the nipple until it breaks which lets air into the tubereleases the vacuum. Or you could try using the human condition.
You could take the back off it and break the tube at the neck — its most vulnerable there. Vacuuming could spread mercury-containing powder or mercury vapor. The correct way is to break the neck off of the tube so theres.
Push one screwdriver into the earth ground and take the other flat-head screwdriver and gently put the end under the suction-like cap. I had a fridge that worked. Be thorough in collecting broken glass and visible powder.
Today I show you how to fix any Cracked or Broken TV screen for FREE. This isnt very smart because sma. Use a chunk of wood stand to the side and wear eye protection.
Jan 25 2020 I have seen a few videos on YouTube that show people breaking off the end of the yolk on a CRT tube to release the vacuum. Itll be a lot safer and also way easier to smash and clean up than the possibly several inches thick glass of a CRT tube. The result is not especially dramatic but definitely safer than sledging the face.
Picture tubes contain pounds of toxic. Mar 27 2015 Favorite Answer As another answer says knock the neck. This method works on ALL TV brands.
Dec 11 2007 Three tosses for a dollar. Oct 17 2012 Put the tube face down on something with the connectorpins sticking straight up. The most simple and safe method to make the tube safe is to identify the small sealed glass nib at the far back of the tube this may be obscured by the electrical connector and then filing a small nick across this and then to break it off using a pair of pliers.
Apr 23 2020 You can dispose of a tube TV by bringing it to a registered and authorized recycling and disposal center that does CRT TV recycling. Mar 29 2012 1. But there are other options that you could consider especially if the TV is still in working condition.
Off the back of the tube from the side at a safe distance. A sucking sound will be heard as the air enters the tube releasing the vacuum. Then flood it with water using a hosepipe – make sure its wet inside and out.