Refinishing a Gun Stock Step 1. This will further smooth the surface of the wood.
Make sure you choose a product that matches your.
How to refinish a gun stock. Spending a couple of hours every day for a week will get you as good of results as the best woodworkers and gunsmiths. When the larger pores have been reduced wipe the exposed wood with a clean damp cloth to clean off any dust left as a result of the sanding. Pour about 8 ounces into a 2 12 gallon metal bucket.
Put on thick rubber gloves and use a 2 12 inch paintbrush to coat. Apply the finish in multiple light coats for best results. There are many ways to do this and way too many different makes and models of firearms.
The really good stockers like Alvin Linden would first seal the grain with spar varnish then sand. Thats right you gotta strip that stock of its old finish before you do anything else. Use a 40-grit sandpaper to reduce the porous surfaces in the wood stock.
The plastic sheet will help the remover to work correctly as it will not dry out. Feb 25 2017 Tru-Oil. Jul 04 2020 How to Refinish a Gun Stock 1.
The Tru-Oil gives your stock a glassy protective finish. Wait a minute or so and test the area. Lightly buff the entire exposed portion of the wood stock with a 0000 steel wool.
Using a few diff. Tru-oil is also a popular guitar finish. If found run fine 400-grit sand paper or steel wool over the rough area until smooth then wipe the wood down with a tack cloth.
Sep 23 2015 I show you how to finish or refinish a rifle stock with Birchwood-Casey Tru-oil Gun Stock Finish. Be sure to leave ample time to dry between coats which gives you an accurate idea of what your stock will look like at various stages of the coating process. Because of the process involved you cant refinish the wood while its attached to metal.
Seal and refinish entire stock with highest quality oil. Remove the Old Finish. Tru-Oil Gun Stock Finish brings out the richness and beauty of fine woods and gives.
May 22 2019 A clean rag or new soft brush is the best method. Let the stock dry for 24 hours and inspect the wood for any drips or streaks. Applying the New Finish In short applying the new oil-blend finish is labor intense.
Read Full Article – httpgoogliL1NdcIn this video we are finally responding to so many requests for information on re-finishing a gun stock. Jan 25 2021 For removing the old finish cover the whole body of the gun with a finish remover. Nov 07 2012 Our Complete Stock Finish Kit gives you everything you need to finish a new stock or to refinish an old stock.
Remove the entire old finish from stock and checker if applicable. Stand the stock in the bucket. After applying the remover on one side wrap that side with a plastic sheet and repeat the same process with the other side.
I live in a warm climate so my wait time. Remove minor dents and scratches. In refinishing therefore I never try to force stain portions of the wood color to match other colors in a given gunstock but instead let the wood maintain the diversity of presentation nature has provided.
Jul 11 2015 Start by applying a liberal coating of solvent over a section of the gun stock. Jun 07 2017 Finishing a stock used to be a nightmare. Birchwood-Casey Tru-Oil is an easy to use product that will give your gunstock a great looking finish.
Clean the Gun Stock. Use some kind of stripper or finish remover. Keep the stock hung up from the wire and apply a light coat of Tru-Oil to the stock.
Work a section at a time. As long as you have a place to work on it.