Then pull the barrel away from the slide until it stops. Do this carefully the firing pin assembly and extractor depressor plunger EDP spring assembly are both spring loaded and will tend to shoot out.
Visit our website to learn more about Sh.
How to disassemble a glock 19. Start by removing the spring. Push it forward into the opening it rests in. To remove the slide from a GLOCK during disassembly the striker and trigger cannot be set to fire.
With the polymer spacer sleeve held down carefully slide the slide cover plate off the slide. Leverage the punch towards you to remove the floorplate. May 16 2018 How to break down your Glock 19 for a simple field strip.
Cover the inner floorplate spring and follower with your thumb to capture them. 6 mm Officially Licensed Product of GLOCK. Fully insert the punch downward and forward of the retaining pin and then squeeze the legs of GTUL to disengage the locking tabs.
Sweeping the chamber with your finger is also a good idea to ensure an empty pistol before the trigger is pulled. The gun shown is. Remove and clean your magazine spring and follower with the GTUL MagBrush.
You open up the bag and give it a peekaboo before you ever touch the gun to make sure the muzzle is oriented in a safe direction. Rack that slide several times and look directly at that chamber to ensure it is empty. Nov 18 2013 First remove the recoil spring by simply pulling it out.
GLOCK 19 GBB AIRSOFT GUN cal. READ THIS OWNERS MANUAL COMPLETELY. Treat it with the same respect you would a firearm.
Then remove the barrel by sliding it up then back. This video will show you how to disassemble your Glock 19. In that condition pulling the small removal lever on the side and moving the slide back and forward will not remove it.
Dec 23 2016 This is a short instructional video on how to disassemble lubricate and reassemble the Glock 19 Generation 4 pistol. This frees it from its holders and allows you to pull it out. Then youre going to remove the magazine if theres a magazine in there then push the mag release pull the magazine out verify that its empty.
With a finger and thumb grip both of its ends and squeeze the inner end towards the outer before pulling it away from the barrel. Nov 03 2017 One of the big problems with the Glocks design is in the disassembly process. For it to come off in that scenario the trigger must be pulled.
This airsoft gun is not a toy. The trigger must be pulled in order to take apart this handgun which is how people shoot themselves. Its in those moments the events are created.
Always carefully follow the safety instructions found in this owners manual and keep this manual in a safe place for future use.